A Beowulf cluster is a group of usually identical PC computers running a Free and Open Source Software (FOSS) Unix-like operating system, such as BSD, Linux or Solaris. They are networked into a small TCP/IP LAN, and have libraries and programs installed which allow processing to be shared among them.

The following is the definition of a Beowulf cluster from the original Beowulf HOWTO published by Jacek Radajewski and Douglas Eadline under the Linux Documentation Project in 1998.

An example of a typical Beowulf cluster setup

Beowulf is a multi-computer architecture which can be used for parallel computations. It is a system which usually consists of one server node, and one or more client nodes connected together via Ethernet or some other network. It is a system built using commodity hardware components, like any PC capable of running a Unix-like operating system, with standard Ethernet adapters, and switches. It does not contain any custom hardware components and is trivially reproducible. Beowulf also uses commodity software like the Linux or Solaris operating system, Parallel Virtual Machine (PVM) and Message Passing Interface (MPI). The server node controls the whole cluster and serves files to the client nodes. It is also the cluster's console and gateway to the outside world. Large Beowulf machines might have more than one server node, and possibly other nodes dedicated to particular tasks, for example consoles or monitoring stations. In most cases client nodes in a Beowulf system are dumb, the dumber the better. Nodes are configured and controlled by the server node, and do only what they are told to do. In a disk-less client configuration, client nodes don't even know their IP address or name until the server tells them what it is.

One of the main differences between Beowulf and a Cluster of Workstations (COW) is the fact that Beowulf behaves more like a single machine rather than many workstations. In most cases client nodes do not have keyboards or monitors, and are accessed only via remote login or possibly serial terminal. Beowulf nodes can be thought of as a CPU + memory package which can be plugged in to the cluster, just like a CPU or memory module can be plugged into a motherboard.

Beowulf is not a special software package, new network topology or the latest kernel hack. Beowulf is a technology of clustering computers to form a parallel, virtual supercomputer. Although there are many software packages such as kernel modifications, PVM and MPI libraries, and configuration tools which make the Beowulf architecture faster, easier to configure, and much more usable, one can build a Beowulf class machine using standard Linux distribution without any additional software. If you have two networked computers which share at least the /home file system via Network File System (protocol), and trust each other to execute remote shells (rsh), then it could be argued that you have a simple, two node Beowulf machine.